ACQUASHIELD-FAST

Two component quick-drying mortar for waterproofing, self-hardening

• Fast interior drying
• Resistant to rain, traffic and ready to be covered after 4 hours
• Easily applied with a roller, brush or spatula
• Waterproof and flexible levelling-off for cement based substrates even on uneven surfaces
• Waterproofing of baths, showers, and swimming pools before ceramic tile laying
• Total and durable protection and waterproofing of screeds on balconies and terraces
• Waterproofing on pre-existing ceramic floors
• Waterproof, flexible levelling-off on cement-based plasters, even if cracked
• Waterproof coating of walls in contact with the ground, foundations and lift-shafts
• Waterproof coating of tanks for containing water
• Waterproof, flexible levelling-off on plaster-board
• In accordance with standard EN 14891, CM O1 P
• Practical box of 18,2 kg, composed by 2 aluminium bags of 6,5 kg each, and by
  one tank of 5,2 kg, prepared for an easy dosage of the quantity for the mixing of
  one bag. To coat 4-6 m² of surface.
 

ACQUASHIELD-FAST is a highly resistant, fast cement-based two component mortar with quartz with granulometry lower than 0.3 mm and new generation additives (component A) and high-tech synthetic polymers in water dispersion (component B). It can be easily applied even vertically with a roller and brush and provides exceptional adhesion. It has been formulated and developed to protect cement-based plasters and concrete structures - including those in contact with the ground, such as exterior cement-based screed on terraces, balconies and swimming pools - against premature ageing caused by the action of water, salts and frost. The particular polymer filming present in component B, which develops in the product drying phase both on the surface and in mass in the internal microcavities, creates a barrier to the passage of water and salt that may be contained therein and and against polluting gases in the air, thus creating long-lasting protection from those substances such as chlorides, sulphates, carbon dioxide and sulphur dioxide, which are the cause of the deterioration of concrete and reinforcing rods. Thanks to the fast drying process, the waterproofing sheath is resistant to rain in just 3 hours and can be walked on and is ready to be covered after 4 hours. The product is particularly suitable for the waterproofing of tanks intended for water containment and can also be used on old substrates such as pre-existing ceramic floors, provided that they are clean, resistant, well anchored and are free of any water stagnation.


Applications

• Waterproof and flexible levelling-off for cement based sub-bases even on surfaces
• Waterproof, flexible, skimming on cement-based plasters, even if cracked
• Waterproof coating of walls in contact with the ground, foundations and lift-shafts
• Waterproofing of baths, showers, balconies, terraces, and swimming pools before the ceramic tiles laying
• Waterproof coating of tanks for containing water
• Waterproof flexible coat on plaster-board